I saw a post on Reddit about aligning tile pieces. I hadn’t heard the credit card method before, but I might just have to try that. Smooth table surfaces seem to work well for me. Anyway – someone mentioned that the Taj Mahal gave them a headache. I remembered I used to build virtually – so why not try this infamously large set virtually! Alas – I built the wrong one!

The only other real “sculpture” (at least according to Rebrickable) after the Minifig and Dragon is the Statue of Liberty – so here we go! It’s nearly 3000 parts and almost exclusively sand-green (which… according to Studio and my color-blindness is nearly identical to light bluish gray… sigh)

Minifigure – 3723 – 2000 – 1850 parts

This guy was surprisingly easy – I had him done in a couple of hours. It helped that each layer was usually very square and symmetrical; I often didn’t need to even do the “hide previous layer” step I used on the dragon. Once again, though, I did miss a couple of pieces, but found and placed them pretty easily. I’m still a little nervous about the 2 1×8 bricks, but beyond that, all I have left in the inventory are 2 1×1 bricks. Not bad!

And now for something completely different! A Lego Dragon, set 3724 from 2001! After a few buildings, a couple attempts at the Death Star and even a vehicle, I thought I’d aim for something a little simpler. Actually, I did a search for 1000+ piece sets from prior to 2005 and there’s not a ton to choose from that aren’t big bins of bricks. There’s a creepy Darth Maul set that is probably built similarly to this guy, but I have zero interest in building him. but this fella looked like a fun distraction, and at 1,538 pieces, fit my search criteria quite well!

This is take 2 in a number of ways. Since I’m putting the massively Complex Death Star on the back-burner, I thought perhaps the intended-for-display Death Star II would be an easier/quicker build. Yikes – was I wrong on a couple of counts! At 3,460 pieces, it’s practically the same count as the UCS Death Star. And while it did not have an overly-detailed interior, it did have angles – tons of them – which stretched my Studio skills to the max.

To avoid finishing all the modular buildings by the end of the month, I was aiming for something different – building the iconic Death Star and making fairly decent progress – when Studio decided to die on me and take away 8 hours worth of building work (I swear, I do save, but apparently not enough). Being too uninterested in repeating steps I had just done, I went back to buildings. But I thought I’d aim for some character and attempt a highly-detailed set that has eluded me through a couple of sales and may simply be forever out of budget: the 2057-piece Fishing Store from 2017.

After the post-Christmas deluge of new-set-building has worn down, I’ve been considering what I actually enjoy about Lego-construction. Perhaps it’s the uncontrolled dust in the house, but I’ve never been one for “displaying” models permanently. I certainly enjoy mechanical models and any type of unique movement. But many times the “spark of joy” moment in building a model comes from seeing what the designer came up with as a method for creating something unique. I’m watching my kids build Diagon Alley and enjoying all of the tiny details that go into the models even though I didn’t put them together. I realized that I might get just as much fun and as many “aha” moments by building models digitally, especially since I’ve enjoyed creating models in BrickLink’s Studio several times before.

So I did an experiment…. with gingerbread on the brain, I built the tiniest gingerbread house set I could find. It took about 5 minutes and sparked a little joy. For fun, I did a slightly larger gingerbread house. And another. Both also fun! I eventually worked my way up to 10267 – Gingerbread House from 2019. This obviously took a bit longer (and disappointingly, most of the minifigs weren’t supported) but was an absolute win. Not only did I get to see how a little rocking horse and snowblower were built, but I was challenged in getting all the odd angles of the roof segments to join (not to mention colorblind challenges with the roof colorings that I eventually gave up on – just make ’em look nice!).

Big Lego reviewers are always talking about their “Hauls” – usually referring to a large Lego.com or BrickLink order they made. But the rare treasure trove is a used lot of Lego parts and sets. When I saw a Craigslist post for “20 lbs of Lego” for $50 that had some interesting looking sets in them, I jumped at it. As my daughters and I sorted through things, we quickly realized this was, indeed a “Bargain Bin” (as we labeled the lists on Rebrickable) – even beyond the typical “$10/lb” that used Lego goes for.

From sets alone we did pretty well. There were 5 different “tiny” sets (6833, 4900, 6812, 6510, and 6811) – some of which I swear I remember from my own childhood collection. On the larger side, 4022 – C21 Sea Cutter and 6265 – Sabre Island were nearly complete. 3053 – Emperor’s Stronghold, 6580 – Land Jet, and 6939 – Saucer Centurion, though missing minifigs, were completed easily from our collection & a BrickLink order. 4026 – Create Your Dreams, 4917 – Mini Robots, 8815 – Speedway Bandit, and 8024 – Universal Building Set were brand new, still in bags! The set that really caught my eye, though, was 3409 – Championship Challenge. Though missing a couple of sidewalls (and all the players), this set was fully complete with turf, nets, and launchers to create a full soccer field. Once assembled I didn’t think it was all that playable, but my daughters quickly figured out the mechanics and soon had ninjas vs stormtroopers playing soccer back and forth! Though one hilarious outcome was that after flicking the players repeatedly, they always seemed to be very interested in the turf!

Someone at work asked about my storage system, and since I tend to share way too many details, I figured I’d turn it into a blog post instead.

First off – a couple disclaimers: this is not a brag post. I know there are plenty of collectors out there with walls and walls of meticulously-sorted Lego parts and I’ve (mostly) gotten over my inferiority complex and accepted that I’ll never have a massive collection like them. On the flip side, this is certainly not a prescription on how to do anything. It’s just a continually-changing work-in-progress that meets my needs right now: a cheap and easy-to-find-everything-in-reach solution for building sets and MOCs from my desk.

I’m quite behind on updating these, but I’ve continued building all Winter (actually, I’ll let you in on a secret – it’s actually July and I’m finally creating this article; maybe I’ll surround it with other builds; maybe it’ll be the last one ever!).

I finally got all the pieces to create the full 8856 helicopter (with proper light gray parts, not that newfangled light “bluish” gray) and put it next to a helicopter MOC I had sitting around since November. Amazingly, the “flex cable system” parts still work quite well, if a little finicky. (The joystick in the cockpit tilts the top rotors in both directions)

As a coworker just said – it’s pretty crazy comparing Lego instructions from 30 years ago to today. I had to do a lot more stud-counting and axle measurements than I do nowadays. Also, we’re now spoiled by axle-colors (evens are usually red or black, odds are gray or yellow); back then, everything was black.

After sorting out all the light-gray from light-bluish-gray pieces (especially the half-pins…. :shudder:), I may end up just leaving this one together on display. I don’t want to go through that again, and realistically, I never end up using the old studded Technic parts in new MOCs. Alternatively (hah) I really enjoy completely alt-builds, so maybe I’ll try to make something using just these parts. Who knows… maybe I’ll end up with more than 3 designed MOCs on Rebrickable yet…